Truck fuel data gets lost in subcontracting. Korea's LTS connects it to shippers with tachographs and AI—and is heading to Japan
How much CO2e did the truck carrying your cargo emit? When trucking jobs pass through layers of subcontractors, the measured data never reaches the main contractor or the shipper. Korea's Logistics Tech Standard (LTS, formerly GLEC) measures fuel use by replacing subcontractors' legally required tachographs. Its purpose-built AI reads inconsistent order sheets and assigns emissions and cargo safety records to each shipper. Co-CEOs Kim Eunwoo and Kang Deokho explain where the data gets lost, why they chose specialized AI over generative AI, how they developed Korea's own emission factors, and why Japan is next.

How much CO2e did the truck carrying your goods emit? Almost no company knows for sure.
CO2e expresses carbon dioxide and other greenhouse gases, such as methane, as an equivalent amount of carbon dioxide. For companies reporting their emissions, a major challenge is Scope 3: emissions across the supply chain, including those from the trucks that move their products.
Japan is phasing in mandatory sustainability reporting under standards set by the Sustainability Standards Board of Japan (SSBJ), starting with the largest companies on the Tokyo Stock Exchange's top-tier Prime market. Companies with an average market capitalization of ¥3 trillion or more must report from fiscal years ending March 2027, followed by those worth ¥1 trillion or more from March 2028. By weight, about 90% of Japan's domestic freight moves by truck.
But there's a gap in the data. In both Japan and Korea, trucking jobs often pass through several layers of subcontractors: a shipper hires a logistics company—the main contractor—which passes the job to a carrier, which passes it to another. Records show who carried the cargo, but how much fuel the truck actually used never makes it back to the shipper. Most companies therefore report estimates based on distance and vehicle type.
Companies want to cut emissions, but they have no way to measure them precisely. Logistics Tech Standard (LTS), a Korean startup, is trying to close that gap with AI and a small device fitted to the truck.
LTS says it is preparing to enter Japan through an overseas-expansion program for young entrepreneurs run by the Incheon Center for Creative Economy and Innovation (ICCEI), a startup support organization in Incheon. That connection led to this interview.
We had the opportunity to speak directly with both of LTS's co-CEOs.
The conversation revealed a business that goes beyond carbon-accounting software. In the founders' words, LTS builds data infrastructure for the trucking supply chain.
- Measure fuel use by replacing a device the truck already needs
Subcontractors swap their legally required tachographs for the LTS device, which reads fuel and electricity use from the vehicle's computer network every 0.1 seconds. - Use AI to make sense of inconsistent order sheets and assign data to each shipper
The AI reads order and dispatch spreadsheets that vary from company to company, then allocates a truck's emissions and cargo safety records to individual shippers.
The two co-CEOs behind LTS

Kim Eunwoo
Co-CEO (operations), LTS
“In carbon data, what matters is not how big the number is, but how you prove it”
Kim spent 12 years in branding and organizational management at a major Korean startup and holds an Impact MBA from KAIST, a Korean science and technology university. As co-CEO since August 2023, she leads sales, service operations, consulting on international standards and overseas expansion. She received a commendation from Korea's Minister of Land, Infrastructure and Transport on Logistics Day 2025.

Kang Deokho
Co-CEO (technology), LTS
“The tachograph records no fuel and no carbon, in Korea, Japan or Europe”
Kang is a four-time tech founder and former director at a listed energy company, with a logistics MBA from Inha University in Korea. He leads development of the LTS DTG, its AI engine and its emissions calculation engine, and advises Korean government bodies on logistics standards.

Who carried it is recorded. What it emitted is lost
Eunwoo, Deokho, thank you for joining us. Could you start by telling us a little about your backgrounds?
I spent more than ten years in logistics and distribution. In my day-to-day work, I kept seeing data get lost as it passed along the chain. It was frustrating.
Deokho and I started this business to close those gaps and help companies comply with carbon regulations.
This is my fourth startup. My background spans IT and hardware, among other technology businesses.
My family ran a fuel business for many years, operating about ten gas stations. Growing up around that, I became interested in carbon emissions from fuel at an early age. At my previous company, I continued researching the transition to a low-carbon economy. That's where Eunwoo and I met, and when I left, we founded LTS together.
So you grew up in the fuel business. Deokho, when Eunwoo says data gets lost along the chain, what does that look like? There's still a record of the delivery, right?
Yes. Collecting data has long been a problem in trucking. The carrier at the bottom of the chain does the actual hauling, while several layers of contractors above it pass the job down.
That carrier often doesn't even know which main contractor the order came from. It can't send safety or emissions data from the trip back up the chain. That was the fundamental problem we identified.
We saw it clearly while advising large logistics companies and public bodies on ISO 14083, the international standard for logistics emissions. The main contractors understood the calculation rules, but they couldn't get fuel data from the subcontractors hauling their cargo. Companies were announcing reduction targets while still reporting most transport emissions as estimates.
We traced it to three causes.
- Structure
In Korea, 90% of trucks belong to owner-operators, and the average driver is in their sixties. Data gets lost as the main contractor passes work to a subcontractor, who passes it to another. - The legal device
Legally required tachographs have no fields for fuel or CO2 in Korea, Japan or Europe. A truck can have the device installed and still collect no fuel data. - Emission factors
The GLEC Framework, an international guideline for logistics emissions, had no Korean emission factors. Korean companies using European factors had to add a mandatory uplift of up to 22%.
We focused on transport because it's the second-largest category in corporate Scope 3 emissions. It's also the hardest to untangle: a single truck often carries goods for several shippers. We believed the technology that solved the hardest problem would become the standard.
Up to an extra 22%—so companies had to report more than they actually emitted. Eunwoo, how similar are those layers of subcontractors to the system in Japan?
Korea's system of having individually owned trucks operate under a carrier's name was modeled on Japan's. Regulation is moving in a similar direction too, and Japan is further ahead in many areas. That's one reason we want to enter the Japanese market.
Just swap the legally required tachograph
I hadn't realized the system came from Japan. So you began by building a device to measure fuel use. Deokho, could we start with the basics: what exactly is a tachograph?
A tachograph records a truck's speed, distance traveled and driving time. Certain commercial vehicles in Korea are required to have one, and Japan has similar rules.
The LTS DTG replaces that legally required tachograph. It reads fuel and electricity use and distance traveled from the CAN bus—the network connecting the vehicle's computers—every 0.1 seconds.
The challenge is that each vehicle model encodes its signals differently. We developed "AI profiling" to analyze those signals automatically, including signals from newly released electric trucks. The 60 models we support account for 96.7% of commercial vehicles sold in Korea in 2025.
So subcontractors only need to swap the device. But Deokho, isn't fuel use something carriers would rather keep to themselves?
Exactly. Fuel use reveals a subcontractor's operating costs, so they're reluctant to share it.
That's why we restrict who receives the data. A main contractor only gets data for its own cargo on that truck. We don't share other contractors' portions, or anything we can't confidently assign to a shipper. No main contractor sees the subcontractor's total fuel use. That's what makes subcontractors willing to share.

So sharing the data doesn't put them at a disadvantage. But Deokho, don't estimates give you a reasonable picture? Why is direct measurement so important?
Because estimates can't show the difference. Calculate emissions from distance and default factors, and a carrier that switched to electric trucks, one that didn't, a careful driver and a careless one all get the same number. Measurement lets companies get credit for the improvements they've made.
Measurement also helps cut emissions. With our previous-generation service, 350 vehicles at one Korean company reduced fuel costs and emissions by 5% a month on average, with a 10% reduction in their best month.
Regulation is moving in the same direction. Korea's mandatory climate disclosures under the Financial Services Commission begin in 2028. The GHG Protocol is considering how to treat measured data in its Scope 3 revision, and EU rules now give priority to primary data.
So those improvements show up in the numbers. Eunwoo, what surprised you when you started using the devices on the road?
The biggest lesson was how different trucks' operating conditions are from those of passenger cars.
On passenger cars, the Carbon DTG is relatively easy to install: it plugs into the OBD connector, the car's diagnostic port, so drivers can fit it themselves. With trucks, there were cases where the OBD connector alone wasn't enough to collect the data.
In the field, truck tachographs are usually wired directly into the vehicle. So we adopted a direct-connection method, but we hadn't expected that it would need a specialized technician to install. There are things that only come into view when you're out in the field.
That experience shaped our principle: if you don't check it in the field, no standard will be adopted in practice. It's also why we developed Korean emission factors rather than using European ones.
An AI that knows "A Steel Co., Ltd." and "A STEEL" are the same
So with trucks, you can't just plug into the OBD port. But even once you've measured fuel use, a truck may be carrying goods for several companies. Deokho, how do you assign the data to each shipper?
That's what our AI, the LAS engine, does.
Main contractors' order sheets and subcontractors' dispatch sheets are spreadsheets with no shared format. The wording changes each time an order passes to another subcontractor. The same company might be listed as "A Steel Co., Ltd.", "A Steel Inc." or simply "A STEEL".
LAS puts the order and dispatch records into a consistent format, then matches them to the fuel and safety data the truck records throughout the day: this leg of the trip carried Company A's cargo; that leg carried Company B's. It then allocates emissions using ton-kilometers—the weight of the cargo multiplied by the distance traveled.
In tests using real company and product names, LAS achieved 85.2% accuracy on 708 pairs and 97.2% on 180 pairs. It never mistook different companies or products for the same one. We use corrected errors and new name variants as training data, retrain the model daily and deploy only versions that pass validation.

Deokho, couldn't generative AI handle that kind of name matching now?
We tested it. Processing 180 dispatch records under the same conditions, LAS took 5.0 seconds. Two leading large language models took 176 and 478 seconds. LAS was 35 to 95 times faster, at less than one two-thousandth of the cost.
LAS doesn't generate text. It assigns probabilities to a fixed set of choices. If the result falls between two thresholds, it runs a second check. Anything still uncertain stays "unassigned" and isn't shared with anyone.
We also enforce a rule in the calculations: the main contractors' shares, plus the unassigned portion, must add up to the truck's total emissions. That prevents two contractors from reporting the same emissions. When you're processing daily dispatches for tens of thousands of trucks, that speed and cost efficiency are essential.
You use the same system to share safety data too. Deokho, what can the AI tachograph recognized at CES do?
The LTS AI DTG analyzes data inside the vehicle. Every 0.1 seconds, it synchronizes signals for speed, braking, acceleration and steering. It detects impacts and all 11 categories of dangerous driving defined by the Korea Transportation Safety Authority in real time, including speeding, sudden acceleration, hard braking, sharp turns, sudden U-turns and abrupt lane changes. For each event, it saves the signal waveforms as evidence.
That's driver safety. We also assess cargo safety. We calculate the impact of hard braking on each item, taking into account its fragility, weight and packaging. We estimate cargo weight from fuel efficiency.
For example, we spoke with a major Korean semiconductor manufacturer. Chips are extremely valuable, so the company needs to know what impacts they experience in transit. When a customer finds a defect, it's hard to tell whether it happened during manufacturing or transport. Without safety data from the logistics company, the chipmaker ends up bearing the entire loss.
Impact records for each leg of the journey provide evidence of what happened and where if cargo is damaged. We're now preparing to put this assessment model directly on the device. That would let it run inside the truck even when the connection drops—a setup known as edge AI.
European factors meant up to a 22% markup, so they built Korea's own
So those impact records provide evidence. Coming back to the third problem you mentioned, Deokho, how did you eliminate the uplift of up to 22% from European emission factors?
We developed Korea's emission factors ourselves.
Under a cooperation agreement with the Korea National Oil Corporation, we obtained national records of crude oil receipts and deliveries. We combined those with data from the Korea Transport Institute to calculate well-to-wheel factors under international guidelines, covering fuel production, delivery and combustion. Smart Freight Centre (SFC), an international nonprofit working to decarbonize logistics, has approved our factors for diesel, electricity, CNG and gasoline, along with our emissions intensity values for trucks, rail and warehouses.
SFC has also certified our calculation tool under ISO 14083 and the latest GLEC Framework, with certificate CRT 020 covering road, sea, air, rail and logistics sites. It passed the 2026 annual review. At an accredited Korean test laboratory, it also passed tests involving 1,800 calculation runs and 10,000 transmissions from the device.
So the factors you developed now have international approval. Eunwoo, is that ambition reflected in "Standard" in your company name?
Yes. We want "standard" to mean something in the rules themselves. Korea's Ministry of Land, Infrastructure and Transport accepted our proposal to add carbon-management fields to the tachograph standard. It was included in transport strategy research for the country's 2035 emissions reduction target and is due to be reflected in a regulatory revision in 2027.
That's also why we changed our name from GLEC to LTS, Logistics Tech Standard, in 2026. Our work now covers cargo safety as well as carbon, and we needed a name that reflects that.
So you're helping shape the national standard. And measurement also makes it possible to put a value on reductions. Eunwoo, could you tell us about your work with electric buses?
Yes. Emissions reductions from electric buses have attracted the most interest.
Replacing a bus with an electric one generates emissions reductions each year for about ten years. Those reductions can become a new source of revenue if they're issued and sold as environmental attribute certificates (EACs), which represent the emissions savings. We signed a contract with a Korean bus group to issue EACs for the annual reductions from 500 electric buses. We're working with the international registry 123Carbon to issue the first year's certificates, with the first sale planned for this December.
If certificates aren't issued within two years, the reductions expire. For a large electric truck, that means a loss of about 10 million Korean won per vehicle. So our customers repeat the same cycle with us every year: measurement, calculation, verification and issuance.
That's a lot of value to lose after two years. Deokho, can you do the same with electric trucks?
Absolutely. If a carrier compares measured data from its diesel and electric trucks and can prove the reduction, it can have EACs issued for those savings. As more vehicles in Japan and Korea go electric, more certificates can be issued. Emissions reductions become assets that can be "exported."

Japan's subcontracting register has no criteria for fuel
Let's turn to Japan. You mentioned that Korea adopted its subcontracting system from Japan. Eunwoo, why choose Japan over other markets?
To be honest, we didn't initially know how advanced Japan's carbon-management efforts were.
That changed in 2024, when we had the chance to work with a Japanese company on carbon management. Its Korean office was recording everything from the building's emissions to its waste and reporting back to headquarters in Japan. We were struck by how seriously Japanese companies took the issue.
Then, at CES 2026, we exhibited with North America and Europe in mind. But Japanese companies showed the most interest.
You were targeting North America and Europe, but Japanese companies were the most interested. Deokho, where do you see an opportunity for LTS in Japan's regulatory framework?
Three things are coming together.
First, disclosure. Under the SSBJ standards, large Japanese companies will face mandatory sustainability reporting in phases from fiscal years ending March 2027. We expect requests for transport emissions data to reach all the way down to subcontractors.
Second, Japan already requires records of the subcontracting chain. Since April 2025, main contractors have had to record, for certain shipments, which carrier actually hauled the goods and its subcontracting tier. But those records have no fields for fuel or emissions. Japanese tachographs are legally required to record only speed, distance and time. Connecting shipments, subcontractors and measured data is exactly what we've done in Korea.
Third, emission factors. Japan's mandatory emissions reporting system uses factors for fuel combustion. In Korea, we used national source data to develop factors that also cover fuel production and delivery, then obtained SFC approval. We believe we can develop those emission factors for Japan in the same way.
So Japan already has half the system in place. Deokho, what's the biggest challenge you face there?
Finding our first pilot partner. To turn a pilot into sales, we need Japanese case studies showing what improved, by how much and at which company, along with evidence of a return on investment.
Technically, we need to add support for the signals used by Japanese vehicle models. Japanese tachographs have a similar form to Korean ones, so we're developing a device for Japan with a partner who can handle the local process for certifying vehicle equipment.
So the first step is finding someone willing to run a pilot. Eunwoo, how would you like to get started with Japanese companies?
In Japan, companies don't sign a contract at the first meeting. Our goal is to become a local company rooted in Japan, rather than an exporter relying on interpreters.
We propose three stages: start with a small pilot using one vehicle model and a few dozen trucks; move on to third-party verification and the first certificates; then expand. Logistics companies are the partners we'd like to work with first.
Proving the numbers you measure
Deokho, to close, what would you like to see from Japanese companies and the government?
Europe is setting the pace on carbon-reduction rules. We'd like to work with Japan, Korea's closest neighbor, to respond more effectively to regulations coming from Europe.
The key is turning emissions reductions into assets. As Japan and Korea switch more trucks and buses to electric power, more reductions can be verified and sold to global tech companies and airlines. We'd be glad to support that work with LTS's technology as the two countries move forward together.
Eunwoo, what would you like to leave readers with?
With carbon data, what matters is how you prove the number, not how big it is. LTS will set the standard for that proof.
Data only flows in ways that don't cost the giver
What I came away with is that logistics emissions are a data-path problem before they are a calculation problem.
Fuel data doesn't arrive because it's cost information
Kang's point about fuel data stayed with me: subcontractors hesitate to share it because it reveals their costs. A lack of technology isn't what's stopping the data from reaching shippers. Sharing it puts the company providing it at a disadvantage.
In Japan, about 99% of trucking companies are small or medium-sized, and more than half operate ten vehicles or fewer. Asking them to hand over all their fuel data is unlikely to get far. LTS makes participation straightforward by replacing a device they already need, and addresses their concerns by sharing only the data for each shipment. Before choosing the technology, you have to design data collection around the interests of the people providing it. That lesson applies well beyond logistics.
Choosing AI by not choosing generative AI
For those of us working with AI and data, the LAS engine offers a useful lesson. Generative AI can match variations in company names. But at three to eight minutes for 180 dispatch records, it can't keep up with tens of thousands of trucks a day.
LAS also leaves uncertain records "unassigned" and doesn't share them. Figures used in disclosures need to be verifiable by a third party later. A model that assigns probabilities and withholds uncertain results is better suited to an audit than one that generates answers. Choosing a small, specialized model to suit the task offers a useful example of how to put AI to work.
Japan already has half the system
Since April 2025, Japan has required records of the carrier and subcontracting tier for certain shipments. Mandatory disclosures will begin with the largest companies from fiscal years ending March 2027. Trucks and other freight vehicles account for 7.3% of Japan's CO2 emissions.
Japan already has a map of where the data needs to go; what's missing is the fuel data to send through it. For people managing shippers' Scope 3 emissions, it's time to consider what data to request from carriers and in what format. For carriers, measured data could become a reason customers choose them. For engineers, Japan is beginning to offer work connecting devices that read truck signals with AI that interprets inconsistent spreadsheets.
LTS has already built those connections in Korea. DATA TIMES will be following the partnerships it forms as it takes its first steps in Japan.
SOURCES ── References
- LTS, written answers to DATA TIMES's questions (co-CEOs, English and Japanese, received October 16, 2026)
- LTS, company presentation (Japanese, received October 16, 2026)
- LTS, official website
- LTS, company website (history, SFC certificate)
- CES, CES Innovation Awards 2026: GLEC AI Tachograph
- Japan Financial Services Agency, amendments to the Cabinet Office Ordinance on disclosure (February 20, 2026)
- Japan Ministry of Land, Infrastructure, Transport and Tourism, CO2 emissions from the transport sector (updated April 23, 2026)
- MLIT, White Paper on Land, Infrastructure, Transport and Tourism 2025
- MLIT, the revised Motor Truck Transportation Business Act (in force April 1, 2025)
- MLIT, Q&A on the revised Motor Truck Transportation Business Act (as of March 31, 2026)
- Kinki District Transport Bureau, operation management guidance
- Japan Ministry of the Environment (published), report on transport biofuels (May 2006)
- MLIT, White Paper 2025, trucking industry
- MLIT, number of trucking operators by size (March 31, 2025)


